Generator 23kW | VanGuard | 480V
$11,998.20
Makinex Generator 23kW Generator is configured for portable or standby jobsite power for tools, lighting, and equipment. Key configuration: 23 kW output class, 110V single phase; 480V three phase voltage, and 60 Hz frequency.
Product Overview
Makinex Generator 23kW Generator is a generator designed for portable or standby jobsite power for tools, lighting, and equipment. The Generator 23kW configuration pairs 23 kW output class, 110V single phase; 480V three phase voltage, and 60 Hz frequency.
Key Features
- Compact 480V three-phase generator for concrete and flooring equipment.
- Independent 110V auxiliary and 480V circuits allow simultaneous mixed-load use.
- Vanguard V-Twin engine and radial flux alternator support high output in a compact frame.
- Four-wheel portable design fits into tighter work areas than tow-behind units.
- 13.2 gal tank and 573 lb dry weight support commercial jobsite planning.
- No voltage selection is needed for the appropriate outlets.
Product Specifications
- Store SKU
- GPE211037
- Manufacturer Product Code
- GEN-23P-MS-480
- Equipment Type
- Portable dual-phase gasoline generator
- Output Class
- 23 kW
- Voltage
- 110V single phase; 480V three phase
- Frequency
- 60 Hz
- Three-Phase Power
- Max 25 kW / continuous 22.5 kW
- Single-Phase Auxiliary Power
- Max 2.2 kW / continuous 2 kW
- Three-Phase Current
- Max 30 A / continuous 27 A
- Single-Phase Auxiliary Current
- Max 20 A / continuous 18 A
- Engine Type
- Twin-cylinder air-cooled petrol
- Engine Model
- Vanguard 61G277
- Displacement
- 993 cc
- Starting System
- Electric key start
- Fuel Economy
- 1.59 gal/hr at 50% load
- Fuel Tank
- 13.2 gal
- Noise Level
- 72 dB no-load at 7 m
- Dry Weight
- 573 lb
- Dimensions
- 43 x 25 x 40 in
- Warranty
- 3-year warranty listed by Makinex for 23kW generators
Applications & Purchase Considerations
The Generator 23kW is best matched to portable or standby jobsite power for tools, lighting, and equipment where the job requires 23 kW output class, 110V single phase; 480V three phase voltage, and 60 Hz frequency.
- Site utility or fuel: 110V single phase; 480V three phase
- Confirm delivery ZIP code and carrier-accessible receiving details before checkout
Product Identification
| Brand | Makinex |
|---|---|
| Equipment Broker Group SKU | EBG-ASE-00437 |
| MPN / Model | GPE211037 |
| Condition | New |
| Division | Generators |
| Primary Category | Generators |
Before You Order
Confirm that model GPE211037, the listed capacity or working range, power requirements, dimensions, and site-delivery needs match your application. Only specifications stated in this listing should be used for purchase planning.
| Weight | 573 lbs |
|---|---|
| Dimensions | 43 × 25 × 40 in |
| Brand | Makinex |
| MPN / Model | GPE211037 |
Related products
APEX 96 in. Lightweight Foam Four-Post Lift Ramp Kit (Set of Two)
APEX 96 in. Lightweight Foam Four-Post Lift Ramp Kit (Set of Two) Pair of 96-inch foam approach ramps for four-post lifts. The longest run available for vehicles with the most aggressive front aero. Specifications Length: 96 in. Quantity: Set of two Use: Four-post lift entry Brand: APEX by BendPak Manufacturer model / part number:…
APEX AB28 Digital Wheel Balancer
APEX AB28 Digital Wheel Balancer Commercial-accuracy digital wheel balancer for passenger cars, light trucks and performance wheels. Fast, repeatable balance results without unnecessary complexity. Specifications Type: Digital wheel balancer Brand: APEX by BendPak Best For: Passenger cars, light trucks, performance…
APEX AT26A Swing-Arm Tire Changer with Assist Tower
APEX AT26A Swing-Arm Tire Changer with Assist Tower Commercial-grade swing-arm tire changer with pneumatic assist tower for low-profile, run-flat and stiff-sidewall tires. Built for daily use in busy shops. Specifications Style: Swing-arm with assist tower Brand: APEX by BendPak Best For: Low-profile, run-flat…
Coats CHUCK – 82111708
Coats CHUCK – 82111708 Coats part number 82111708 Whether you operate a single-bay independent shop or a multi-bay dealership service department, equipping your team with reliable coats parts & accessories pays back every shift in productivity, technician safety, and customer satisfaction. The Coats CHUCK – 82111708…
Coats CHUCK-LCKNG,QCK – 82033343
Coats CHUCK-LCKNG,QCK – 82033343 Coats part number 82033343 Whether you operate a single-bay independent shop or a multi-bay dealership service department, equipping your team with reliable coats parts & accessories pays back every shift in productivity, technician safety, and customer satisfaction. The Coats…
Coats CHUCK-SPROCKET-TUBE WELD 5000M – 7110127
Coats CHUCK-SPROCKET-TUBE WELD 5000M – 7110127 Coats part number 7110127 Whether you operate a single-bay independent shop or a multi-bay dealership service department, equipping your team with reliable coats parts & accessories pays back every shift in productivity, technician safety, and customer satisfaction. The…
Coats CYLINDER – 82001281
Coats CYLINDER – 82001281 Coats part number 82001281 Whether you operate a single-bay independent shop or a multi-bay dealership service department, equipping your team with reliable coats parts & accessories pays back every shift in productivity, technician safety, and customer satisfaction. The Coats CYLINDER –…
Ranger Brake Lathe Truck Adapter Pkg.
Ranger Brake Lathe Truck Adapter Pkg. Truck Adapter Package (32 pc) / Fits RL-8500 & RL-8500XLT Whether you operate a single-bay independent shop or a multi-bay dealership service department, equipping your team with reliable brake lathes pays back every shift in productivity, technician safety, and customer…

Reviews
There are no reviews yet.